COPP ENABLED MODULES
COPP enabled modules are process controllers, I/O-modules and sensors, which are programmable in COPP by means of the tools in the VIGO6 Integrated Development Environment.
Additional info about COPP enabled modules, including features and design, building clusters, network types, wiring, dimensions, etc. can be found on this page:
Introduction to COPP enabled modules
PD802 COPP DPI
PD803 COPP DPI GSM GPS
PD804 COPP DPI 4G & GPS
PD820 15 CH. DIGITAL I/O
PD821 15 CH. DIGITAL IN
PD840 15 CH. ANALOGUE IN
PD850 MULTIFUNCTION I/O
PD870 MOTOR CONTROLLER
PD644 Analogue I/O – HART
NON-COPP ENABLED MODULES
NON-COPP enabled modules are process controllers and I/O-modules which do not offer support for programming in COPP. However, they they can be fully integrated in projects with modules supporting COPP. Some of these modules may be programmed using the Process-Pascal programming language.
Additional info about NON-COPP enabled modules can be found on this page: Introduction to NON-COPP enabled modules
PD951 RFID reader
PD981 KeyLED (OEM)
P-NET LAN to P-NET RS485 interface
Unit for galvanic isolation of P-NET RS485
Products in this category are Base Modules for both the M36- and the M100 Series.
BM101 – WITH 4 RELAY (SPDT)
Products in this category are accessories for use with the products above.
GPS and GSM antenna cable kit for PD803/PD804
GSM and GPRS antenna for PD803/PD804
Antenna collection for PD664
Battery for PD60x DPI
Labels Base Modules
Loop antenna for PD951 RFID Reader
Modules listed in this category are process controllers and I/O-modules, and accessories, which can be delivered as spareparts for existing control systems (not recommended for use in new projects).
PD3120 Digital I/O interface 16 ch
PD3221 Universal Process Interface, UPI
PD3230 Weight transmitter
PD3235 Weight transmitter for 10 load cells
PD3240 Analog Interface Module AIM
PD3250 Analog Interface Module, AIM, voltage measurement
PD3940 P-NET to RS232 converter
PD626 – Stepper motor controller and driver
Gasket for PD688 Display
Gasket for PD4000 Display and PD681 Display
Products in this category have effectively been removed from production. It is still possible to find relevant information regarding the products by navigating to the individual products information page like earlier. On this page, you’ll also be presented with relevant replacements for the discontinued counterpart.